AJMF-365/368/468封边机 双修+仿形

AJMF-365/368/468封边机 双修+仿形

分享

AJMF-365/368/468封边机 双修+仿形

  • 产品详情
  • 产品参数

木工封边机


主要技术参数

Main Technical Parameters

木工封边机参数


配置表

Configuration table

木工封边机配置


功能特点

Features

11b.jpg

前后齐头由前齐头和后齐头组成,由台湾亚德客电磁阀控制,台湾亚德客气缸,并有特有的齐头撞板保护功能,由特的锯片切断,加强了齐头的稳定性。

Controlled by Taiwan Yadeke solenoid valves, the front and rear end trimming is equipped with Taiwan Yadeke cylinders and a unique anticollision device. Boards are cut off by tailor-made saw blades to strengthen the stability of trimming.


粗修刀为15°平刀,为精修留出40-50丝的余量,采用靠模自动跟踪和高频高速电机实现快速切割。精修刀为R2斜修刀,为刮边留出5-6丝的余量,采用靠模自动跟踪和高频高速电机实现快速切割,R2斜修刀修出弧度。

The rough finish knife is a 15-degree flat knife, leaving a margin of 40-50 dmm for fine finish. By using automatic filleting and a high-frequency and high-speed motor, fast cutting can be ensured. The fine finish knife is an oblique R2, leaving a margin of 5-6 dmm for scraping. By using automatic filleting and a high-frequency and high-speed motor, the oblique R2 can shape curves.


仿形刮边,用于消除修边非直线运动的切割过程所引起次波浪痕迹,使板材上下部分更加光滑整洁,同时刮边还可以调整圆弧的大小,让封边效果更完美。

Imitation scraping is used to eliminate the wave traces caused by non-straight motion of trimming, so that the upper and lower parts of the board can be smoother while the curvature can also be adjusted to make the sealing effect perfect.


微信图片_202110171616.jpg


微信图片_20211017161602.jpg


微信图片_20211017161923.jpg






品牌
奥佳
销量
34
邮箱
kyrie@aojiamachinery.com
邮箱
ringolin@aojiamachinery.com